Skip to main content
Skip table of contents

SinkFract32Properties

Overview

Copies the data at the input pin and stores it in an internal buffer

Discussion

This module copies the fract32 data at the input pin to an internal buffer (value). The copy operation occurs at each block process and thus the data continuously updates. This module is used to store the value of a wire and make it available to the control code, or a host processor. The inspector window shows the data using a plot. In the inspector window, there are two edit boxes for maximum(Ymax) and minimum(Ymin) limits for plotting amplitude. If user gives Ymax less than Ymin then the range [Ymax Ymin] will be automatically set by MATLAB

Additionally, this module makes the wire information available as internal variables. Block size, channel number, sample rate and signal complexity can be accessed in MATLAB code, source code, or in a layout using the ParamGet module.

Type Definition

CODE
typedef struct _ModuleSinkFract32Properties
{
    ModuleInstanceDescriptor instance;            // Common Audio Weaver module instance structure
    INT32 BlockSize;                              // Block Size
    INT32 NumChannels;                            // Number of Channels
    FLOAT32 SampleRate;                           // Sample Rate
    INT32 IsComplex;                              // Is Complex
    INT32 enable;                                 // To Enable or disable the plotting
    fract32* value;                               // Captured values
    FLOAT32* yRange;                              // Yaxis Range
} ModuleSinkFract32PropertiesClass;

Variables

Properties

Name

Type

Usage

isHidden

Default value

Range

Units

BlockSize

int

const

0

32

Unrestricted

NumChannels

int

const

0

1

Unrestricted

SampleRate

float

const

0

48000

Unrestricted

IsComplex

int

const

0

0

Unrestricted

enable

int

parameter

1

0

Unrestricted

value

fract32*

state

0

[32 x 1]

Unrestricted

yRange

float*

parameter

0

[1 x 2]

Unrestricted

Pins

Input Pins

Name: in

Description: audio input

Data type: fract32

Channel range: Unrestricted

Block size range: Unrestricted

Sample rate range: Unrestricted

Complex support: Real and Complex

MATLAB Usage

File Name: sink_fract32_properties_module.m

CODE
 M=sink_fract32_properties_module(NAME)
 Creates a sink (capture) module for use with the Audio Weaver
 environment.  The module captures a block of fract32 input data and
 stores it into an internal buffer.  Arguments:
    NAME - name of the module
 Copyright 2008.  DSP Concepts, Inc.  All Rights Reserved.
 Author:  Paul Beckmann

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.