STOmni2

Overview

ST Stereo Widening module

Discussion

Omni2 Stereo widening effect applies to Loudspeakers (not headphones).

This version supports 48KHz sample frequency only and an input blocksize from 96 to 480 samples.

The module takes two arguments: Omni2CentreOutput and AudioMode.

Omni2CentreOutput : 0 to disable the center output (for 3.0), 1 to enable the center output (3.0)

AudioMode : Can be one of the eAcMode_Supported enumeration values (AMODE10 or AMODE20)

Type Definition

CODE

typedef struct _ModuleSTOmni2
{
    ModuleInstanceDescriptor instance;            // Common Audio Weaver module instance structure
    INT32 nAPIResult;                             // Return status for last call into the ST API
    INT32 audioMode;                              // Audio mode 1 - Mono, 2 - Stereo
    INT32 centerEnable;                           // Enable center output
    INT32 enable;                                 // Block enable
    INT32 strength;                               // Strength percent (0 - 100)
    INT32 listeningAngle;                         // Omni2 listening angle (10, 20, or 30 degrees)
    void * pGlobals;                              // Points to the global variables structure
} ModuleSTOmni2Class;

Variables

Properties

Name	Type	Usage	isHidden	Default value	Range	Units
nAPIResult	int	state	0	0	Unrestricted
audioMode	int	const	0	2	Unrestricted
centerEnable	int	const	0	0	Unrestricted
enable	int	parameter	0	1	0:1:1
strength	int	parameter	0	0	0:1:100
listeningAngle	int	parameter	0	1	Unrestricted	degrees
pGlobals	void *	const	1		Unrestricted

Pins

Input Pins

Name: in

Description: audio input

Data type: fract32

Channel range: 2

Block size range: 96:480

Sample rate range: 48000

Complex support: Real

Output Pins

Name: out

Description: audio output

Data type: fract32

MATLAB Usage

File Name: st_omni2_module.m

CODE

 M = st_omni2_module(NAME, AUDIOMODE, CENTER_ENABLE)
 Audio Weaver wrapper for the ST Stereo Widening module.  Arguments:
   NAME - name of the module.
   AUDIOMODE -  Input is:  1 - Mono, 2 - Stereo
   CENTER_ENABLE - enable center output (3.0)
 Copyright (c) 2017 DSP Concepts, Inc.  All Rights Reserved.
 Author:  Chris Perry