Skip to main content
Skip table of contents

Interleave

Overview

Interleaves multiple audio signals

Discussion

The interleave module takes N audio inputs and produces a single output, where the N input signals are interleaved together. This module allows for different signals to be mixed into a single "wire,", which is useful when creating layouts, as a single processing path can represent parallel channels. Each input pin can have an arbitrary number of interleaved channels. The output contains all of the channels on the first input pin followed by all of the channels of the second input pin, and so on, for all input pins. There are no restrictions on the number of channels or the blockSize, though the blockSize of all inputs must be the same.

Type Definition

CODE
typedef struct _ModuleInterleave
{
    ModuleInstanceDescriptor instance;            // Common Audio Weaver module instance structure
} ModuleInterleaveClass;

Pins

Input Pins

Name: in1

Description: Input signal

Data type: {float, int, fract32}

Channel range: Unrestricted

Block size range: Unrestricted

Sample rate range: Unrestricted

Complex support: Real and Complex

Name: in2

Description: Input signal

Data type: {float, int, fract32}

Channel range: Unrestricted

Block size range: Unrestricted

Sample rate range: Unrestricted

Complex support: Real and Complex

Output Pins

Name: out

Description: Output signal

Data type: {float, int, fract32}

MATLAB Usage

File Name: dither_fract32_module.m

CODE
 M=interleave_module(NAME, NUMIN)
 Creates a multi-input interleave module for use in the Audio Weaver
 environment.
 Arguments:
    NAME - name of the module.
    NUMIN - number of input pins.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.