SCNRv1

Overview

DSP Concepts proprietary Single-Channel Noise Reduction. Version 1.

Discussion

DSP Concepts proprietary Single-Channel Noise Reduction module. This module works in conjunction with the WOLA filterbank modules. The module has a mono input pin and mono output pin. The input pin is mic input signal and output pin is stationary noise-suppressed signal.

The module operates on any block size and any sampling rate. There is no design time parameters. At run time, you specify the minimum gain. The minimum gain is a lower clipping point of gain in dB for each frequency bin.

The module estimates SNR and determins attenuation of each frequency from gain table.

Type Definition

CODE

typedef struct _ModuleSCNRv1
{
    ModuleInstanceDescriptor instance;            // Common Audio Weaver module instance structure
    FLOAT32 minGaindB;                            // the minimum gain to be applied in dB
    FLOAT32 noiseAdjust;                          // noise level adjustment.
    FLOAT32 minGain;                              // the minimum gain to be applied in linear.
    FLOAT32 attackTime;                           // Internal coefficient realizing the attack time.
    FLOAT32 attackCoeff;                          // Internal coefficient realizing the attack time.
    FLOAT32 freq1;                                // Internal coefficient realizing the attack time.
    FLOAT32 b0_1;                                 // Desired first numerator coefficient.
    FLOAT32 b1_1;                                 // Desired second numerator coefficient.
    FLOAT32 a1_1;                                 // Desired second denominator coefficient.
    FLOAT32 freq2;                                // Internal coefficient realizing the attack time.
    FLOAT32 b0_2;                                 // Desired first numerator coefficient.
    FLOAT32 b1_2;                                 // Desired second numerator coefficient.
    FLOAT32 a1_2;                                 // Desired second denominator coefficient.
    FLOAT32 ppriorTimeConst;                      // Internal coefficient realizing the attack time.
    FLOAT32 ppriorEta;                            // Internal coefficient realizing the attack time.
    FLOAT32* pxState;                             // Sb smoothing state for Px computation.
    FLOAT32* pshatState;                          // Sb smoothing state for Ps_hat computation.
    FLOAT32* gainState;                           // Sb smoothing state for gain computation.
    FLOAT32* pnEnvState;                          // Attack release env state for Pn computation.
    FLOAT32* prevPsHat;                           // Feedback memory.
} ModuleSCNRv1Class;

Variables

Properties

Name	Type	Usage	isHidden	Default value	Range	Units
minGaindB	float	parameter	0	-15	-15:1:0	dB
noiseAdjust	float	parameter	0	0.5	0.01:0.01:1
minGain	float	derived	1	0.17783	Unrestricted
attackTime	float	const	1	2000	Unrestricted
attackCoeff	float	derived	1	1.0417e-05	Unrestricted
freq1	float	const	1	12	Unrestricted
b0_1	float	derived	1	0.00078478	Unrestricted
b1_1	float	derived	1	0.00078478	Unrestricted
a1_1	float	derived	1	0.99843	Unrestricted
freq2	float	const	1	5	Unrestricted
b0_2	float	derived	1	0.00032714	Unrestricted
b1_2	float	derived	1	0.00032714	Unrestricted
a1_2	float	derived	1	0.99935	Unrestricted
ppriorTimeConst	float	const	1	311.9	Unrestricted
ppriorEta	float	derived	1	0.99993	Unrestricted
pxState	float*	state	1	[1 x 32]	Unrestricted
pshatState	float*	state	1	[1 x 32]	Unrestricted
gainState	float*	state	1	[1 x 32]	Unrestricted
pnEnvState	float*	state	1	[1 x 32]	Unrestricted
prevPsHat	float*	state	1	[1 x 32]	Unrestricted

Pins

Input Pins

Name: in

Description: Audio input

Data type: float

Channel range: 1

Block size range: Unrestricted

Sample rate range: Unrestricted

Complex support: Complex

Output Pins

Name: out

Description: audio output

Data type: float

MATLAB Usage

File Name: scnr_v1_module.m

CODE

 M = scnr_v1_module(NAME)
 Single-channel noise reduction module.  This module reduces stationary noise floor level.  Arguments:
   NAME - name of the module