DOASimulation
Overview
Simulate specified DOA for specified mic array
Discussion
This module implements a synthesized direction of arrival for a specified mic geometry. Module argument NUMMICS sets number of microphones. Module parameter MicPositions allows user to enter x,y coordinates of the microphones. Module parameter Angle appears on inspector and allows user to select direction of arrival. A mono signal is input to the module. The module outputs a N channel signal with delays set to simulate the desired DOA.
Type Definition
-- Not Shown --
Variables
Properties
Name | Type | Usage | isHidden | Default value | Range | Units |
Angle | float | parameter | 0 | 0 | 0:360 | degrees |
Delays | float* | state | 0 | [4 x 1] | Unrestricted | |
MicPositions | float* | parameter | 0 | [2 x 4] | Unrestricted |
Pins
Input Pins
Name: monoIn
Description: Single channel input
Data type: float
Channel range: 1
Block size range: Unrestricted
Sample rate range: Unrestricted
Complex support: Real
Output Pins
Name: MIcsOut
Description: Simulated Mic channels out
Data type: float
Scratch Pins
Channel count: 1
Block size: 32
Sample rate: 48000
Channel count: 1
Block size: 32
Sample rate: 48000
Channel count: 1
Block size: 32
Sample rate: 48000
Channel count: 1
Block size: 32
Sample rate: 48000
Channel count: 1
Block size: 32
Sample rate: 48000
MATLAB Usage
File Name: doa_simulation_subsystem.m