Skip to main content
Skip table of contents

PinkNoiseFract32

Overview

Pink noise generator

Discussion

This subsystem generates pink noise by combining a white noise generate and a filter The RMS output level is -20 dB

Type Definition

-Not Shown-

Pins

Output Pins

Name: out

Description: audio output

Data type: fract32

Scratch Pins

Channel count: 1

Block size: 32

Sample rate: 48000

Channel count: 1

Block size: 32

Sample rate: 48000

MATLAB Usage

File Name: pink_noise_fract32_subsystem.m

CODE
 SYS=pink_noise_fract32_subsystem(NAME, SR, NUMCHANNELS, BLOCKSIZE)
 Creates a module which outputs pink noise at a specified standard
 deviation.  Internally, the module uses a white noise generator
 followed by an IIR filter.  Arguments:
    NAME - name of the module.
    SR - sample rate.  This must be set since this is an output module.
    NUMCHANNELS - number of interleaved channels in each output pin.
    BLOCKSIZE - number of samples per output channel.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.