Adder

Overview

Multi-input adder

Discussion

The adder has a variable number of input pins and a single output pin. In all cases, all inputs must have the same block size and this equals the block size of the output pin.

The module operates in two fundamentally different modes depending upon the value of the variable oneChannelOutput. If oneChannelOutput==0, then all of the input pins must have the same number of channels. The output pin will then have the same number of channels as the input pins and be formed as the sum of all inputs. If oneChannelOutput==1, then the input pins can each have a different number of channels. The output is then a one channel signal that is formed as the sum over all input channels.

*NOTE* Enabling oneChannelOutput may reduce performance.

Type Definition

CODE

typedef struct _ModuleAdder
{
    ModuleInstanceDescriptor instance;            // Common Audio Weaver module instance structure
    INT32 oneChannelOutput;                       // Boolean value that determines whether all channels are summed to form a single output.
} ModuleAdderClass;

Variables

Properties

Name	Type	Usage	isHidden	Default value	Range	Units
oneChannelOutput	int	const	0	0	0:1:1

Pins

Input Pins

Name: in1

Description: Audio input

Data type: float

Channel range: Unrestricted

Block size range: Unrestricted

Sample rate range: Unrestricted

Complex support: Real and Complex

Name: in2

Description: Audio input

Data type: float

Channel range: Unrestricted

Block size range: Unrestricted

Sample rate range: Unrestricted

Complex support: Real and Complex

Output Pins

Name: out

Description: Audio output

Data type: float

MATLAB Usage

File Name: adder_module.m

CODE

 M=adder_module(NAME, NUMIN, ONECHANNELOUTPUT)
 Creates a multi-input adder module for use with Audio Weaver.
 
 Arguments:
    NAME - name of the module.
    NUMIN - number of input pins.
    ONECHANNELOUTPUT - boolean value which determines if multi-channel
         input signals are collapsed to a single output channel.