Skip to main content
Skip table of contents

MixerV3Fract32

Overview

M-input x N-output mixer

Discussion

This module implements a full M-input x N-output mixer with a total of MxN coefficients. N = number of channels on the one output pin. M = sum of number of channels on all input pins. When using the module in MATLAB, the coefficients are contained in the .coeffs matrix with the gain from the ith input to the jth output found at coeffs(i, j). From the C code point of view, the .coeffs array is a one dimensional array of length MxN. The gain from input m (0 <= m <= M-1) to output n (0 <= n <= N-1) is stored at:

coeffs[m + n*M]

Put another way, the first M coefficients are the gains needed to compute the first output channel. The next M coefficients are the gains needed to compute the second output channel, and so out.

The mixer implements smoothing on a block-by-block basis. Standard 1st order exponential smoothing is used. Gain adjustments are made to the coeffs matrix. Internally, the module holds a second matrix of instantaneous gains, currentCoeff, which smoothly approaches coeffs. The rate of the smoothing operation is controlled by smoothingTime.

When the module is bypassed, it copies the ith input channel to the ith output channel. If the module has more output channels than input channels, the remaining output channels are set to 0.

Type Definition

CODE
typedef struct _ModuleMixerV3Fract32
{
    ModuleInstanceDescriptor instance;            // Common Audio Weaver module instance structure
    INT32 maxNonZero;                             // Maximum number of non zero coefficients.
    INT32 postShift;                              // Number of bits to shift
    FLOAT32 gainScale;                            // Scale coefficients based on postShift.
    INT32 numIn;                                  // Number of input channels.
    FLOAT32* gain;                                // Linear gain.
    fract32* nonZeroGainFract32;                  // Instanteous fract32 gain being applied.
    SparseItem * table;                           // Internal data holding data for quick processing
} ModuleMixerV3Fract32Class;

Variables

Properties

Name

Type

Usage

isHidden

Default value

Range

Units

maxNonZero

int

const

1

2

Unrestricted

postShift

int

const

1

4

Unrestricted

gainScale

float

derived

1

0.0625

Unrestricted

numIn

int

derived

1

1

Unrestricted

gain

float*

parameter

0

[1 x 2]

-60:20

nonZeroGainFract32

fract32*

state

1

[2 x 1]

Unrestricted

table

SparseItem *

parameter

1

Unrestricted

Pins

Input Pins

Name: in1

Description: Input signal

Data type: fract32

Channel range: Unrestricted

Block size range: Unrestricted

Sample rate range: Unrestricted

Complex support: Real

Output Pins

Name: out

Description: audio output

Data type: fract32

MATLAB Usage

File Name: mixer_v3_fract32_module.m

CODE
 M=mixer_v3_fract32_module(NAME, NUMOUT, NUMINPIN, MAXNONZERO)
 Creates a mixer module for use in the Audio Weaver environment. 
 The mixer has multiple input pins and one output pin. Each of the pins 
 can contain multiple interleaved channels. The number of input channels 
 per input pin is determined by the upstream audio module. You must 
 specify the number of input pins and output channels.  
 
 Arguments:
   NAME - name of the module.
   NUMOUT - number of output channels.
   NUMINPIN - number of input pins.
   MAXNONZERO - maximum number of non zero coefficients.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.