Two piece interpolation module
This module performs interpolation using two line segments with a knee between the two pieces. The parameter threshold specifies the point of intersection of the two lines. The kneeDepth specifies the curvature of the smooth region connecting the two line segments. If kneeDepth is zero, then there is no knee, simply two lines connected to each other at the threshold point. If kneeDepth is nonzero, then the curved region will begin at threshold-kneeDepth and ends at threshold+kneeDepth. The slopeL and slopeH are the slopes of the left hand side line and right hand side line respectively.
Optionally, the slopes of the lines can be specified by their ratio where ratio is defined as 1/slope To use ratios set the constructor argument USERATIOS to 1 and then set the .ratioL and .ratioR fields of the module. When ratios are used the set function converts from ratio to slope. When USERATIOS = 0 then the .ratioL and .ratioR parameters of the module are ignored. In all cases, the processing function uses the slope parameters for calculations. The ratio is useful when using this module within a dynamics processor.
When ratios are used and a ratio equals 0 then the corresponding slope is set to 1e6 (prevent divide by zero).
typedef struct _ModuleTwoPieceInterpV2
ModuleInstanceDescriptor instance; // Common Audio Weaver module instance structure
FLOAT32 threshold; // The point at which two line segments meet
INT32 useRatios; // Specifies whether the line segments are specified using their slopes (=0) or ratios (=1)
FLOAT32 slopeL; // The slope of the line segment on the left hand side
FLOAT32 slopeH; // The slope of the line segment on the right hand side
FLOAT32 ratioL; // 1/slope of the line segment on the left hand side
FLOAT32 ratioH; // 1/slope of the line segment on the right hand side
FLOAT32 kneeDepth; // Specifies the curvature of the smooth region connecting the two line segments
FLOAT32* polyCoeffs; // Interpolation coefficients returned by the grid control.
[4 x 1]
Description: audio input
Data type: float
Channel range: Unrestricted
Block size range: Unrestricted
Sample rate range: Unrestricted
Complex support: Real
Description: audio output
Data type: float
File Name: two_piece_interp_v2_module.m
This Audio Weaver module performs interpolation using two line segments
with a knee between the two pieces. This version builds upon the
two_piece_interp_module.m and allows lines to be specified either as
slopes or ratios (1/slope). Arguments:
NAME - name of the module.
USERATIOS - Optional boolean allows you to specify the ratio of
each line segment rather than the slope. The ratio is
defined as 1/slope. Default = 0, which means the slope of
the line segments is specified directly.