TableInterpRuntime

Overview

Table driven interpolation module with set function. Supports linear and smooth modes

Discussion

This module performs table lookup using unevenly spaced X and Y values.

The module supports linear and DSPC interpolation. Internally the interpolation is performed using a piece wise polynomial approximation. With linear interpolation a first order polynomial is used; for 4th order, a polynomial is used. The 4th order interpolation preserves the shape of the function as opposed as overshoots on a spline. This new interpolation method developed by DSP Concepts Inc. developed uses a reduced set of 3 coefficients.

The input to the module serves as the X value in the lookup and the output equals the Y value derived from doing the interpolation. The module is configured by setting the internal matrix .XY. The first row of .XY represents X values and the second row Y values.

At instantiation time you specify the total number of points (MAXPOINTS) in the table. MAXPOINTS determines the amount of memory allocated to the table. Then at run time, you can change the number of points actively used by the table (.numPoints). .numPoints must be less than or equal to MAXPOINTS.

The variable .order specifes either linear (=2) or cubic (=4) interpolation.

The module also provides a custom inspector for easy configuration from the Audio Weaver Designer GUI. The GUI translates the XY table into a piece wise polynomial segments. The matrix .polyCoeffs contains 4 x (MAXPOINT-1) values. Each column represents the coefficients for each polynomial. Row 4 is the X^3 coefficent, row 3 the X^2 coefficient, row 2 the X coefficient and row 1 the constant term.

If the input x falls outside of the range of values in the XY table then the input is clipped to the allowable range.

Type Definition

CODE
``````typedef struct _ModuleTableInterpRuntime
{
ModuleInstanceDescriptor instance;            // Common Audio Weaver module instance structure
INT32 maxPoints;                              // Maximum number of values in the lookup table. The total table size is [maxPoints 2].
INT32 numPoints;                              // Current number of interpolation values in use.
INT32 order;                                  // Order of the interpolation. This can be either 2 (for linear) or 4 (for pchip).
INT32 updateActive;                           // Specifies whether the poly coefficients are updating (=1) or fixed (=0).
FLOAT32* XY;                                  // Samples of the lookup table. The first row is the x values and the second row is the f(x) values
FLOAT32* polyCoeffs;                          // Interpolation coefficients returned by the grid control
} ModuleTableInterpRuntimeClass;``````

Variables

Properties

 Name Type Usage isHidden Default value Range Units maxPoints int const 0 8 4:1:1000 numPoints int parameter 0 4 4:1:8 order int parameter 0 2 2:2:4 updateActive int parameter 1 1 0:1 XY float* parameter 0 [2 x 8] Unrestricted polyCoeffs float* state 0 [4 x 7] Unrestricted

Pins

Input Pins

Name: in

Description: audio input

Data type: float

Channel range: Unrestricted

Block size range: Unrestricted

Sample rate range: Unrestricted

Complex support: Real

Output Pins

Name: out

Description: audio output

Data type: float

MATLAB Usage

File Name: table_interp_runtime_module.m

CODE
`````` M=table_interp_runtime_module(NAME, MAXPOINTS)
This Audio Weaver module performs interpolation using a lookup table together
with a configurable interpolation order. The table contains (X,Y) value pairs
and can be unevenly spaced.
For 4th order, this module uses a new interpolation method developed by
Holguin at DSP Concepts Inc.. It corresponds to a variation of the
Polynomial Hermit Interpolation or to the Akima Interpolation methods.
The interpolation method is different than in table_interp_module. The inspector
function is borrowed from such module and the response is slightly
different. This module however saves 25% of the memory for coefficients
and includes a runtime set function on the target.
Arguments:
NAME - name of the module.
MAXPOINTS - maximum number of points allocated to the lookup table. This
is set at design time and has a minimum value of 4. At run
time, you can change the number of values in the lookup table
from 4 to MAXPOINTS.
The module can be configured to perform linear or pchip interpolation.``````

JavaScript errors detected