DCSourceV2Fract32
Overview
Source buffer holding 1 wire of constant data with optional input control pin to scale DC value
Discussion
The DC source module has an internal variable holding one data value. The module continuously fills the output wire with the internal data value. Since this is a source module, you must specify the number of channels, blockSize, and sample rate of the output pin
Type Definition
typedef struct _ModuleDCSourceV2Fract32
{
ModuleInstanceDescriptor instance; // Common Audio Weaver module instance structure
FLOAT32 value; // Data Value
fract32 valuefract32; // Data Value
} ModuleDCSourceV2Fract32Class;
Variables
Properties
Name | Type | Usage | isHidden | Default value | Range | Units |
value | float | parameter | 0 | 0.99 | -1:1 | |
valuefract32 | fract32 | derived | 0 | 0.99 | Unrestricted |
Pins
Input Pins
Name: control
Description: Input control signal
Data type: fract32
Channel range: Unrestricted
Block size range: Unrestricted
Sample rate range: Unrestricted
Complex support: Real
Output Pins
Name: out
Description: output data
Data type: fract32
MATLAB Usage
File Name: dc_source_v2_fract32_module.m
M=dc_source_v2_fract32_module(NAME, NUMCHANNELS, BLOCKSIZE, SAMPLERATE, CONTROLPIN)
Creates a source module that allows you to inject DC test data into
the audio processing layout. Also has optional input control pin to scale
the data value to be written on ooutput pin.
Arguments:
NAME - name of the module.
NUMCHANNELS - number of interleaved channels in each output pin.
BLOCKSIZE - number of samples per output channel.
SAMPLERATE - sample rate of the output signal, in Hz.
CONTROLPIN - boolean to add control input pin or not.